Regulation on safety supervision of the hottest sp

2022-08-09
  • Detail

Article 1 These Regulations are formulated in order to strengthen the safety supervision of special equipment, prevent and reduce accidents, ensure the safety of people's lives and property, and promote economic development

Article 2 the term "special equipment" as mentioned in these Regulations refers to boilers, pressure vessels (including gas cylinders, the same below), pressure pipelines, elevators, hoisting machinery, passenger ropeways, and large amusement facilities that involve life safety and are relatively dangerous

the catalogue of the special equipment mentioned in the preceding paragraph shall be formulated by the Department responsible for the safety supervision and administration of special equipment under the State Council (hereinafter referred to as the special equipment safety supervision and Administration Department of the State Council), and shall be implemented after being approved by the State Council

Article 3 the production (including design, manufacturing, installation, transformation and maintenance, the same below), use, inspection and inspection, as well as supervision and inspection of special equipment shall comply with these regulations, unless otherwise stipulated in these regulations

these Regulations are not applicable to the safety supervision of military equipment, nuclear facilities, aerospace vehicles, railway locomotives, marine facilities and ships, as well as special equipment used in coal mines

the supervision and administration of the installation and use of hoisting machinery used in housing construction sites and municipal engineering sites shall be implemented by the construction administrative department in accordance with the provisions of relevant laws and regulations

Article 4 the special equipment safety supervision and Administration Department of the State Council is responsible for the safety supervision of special equipment throughout the country, and the local departments responsible for the safety supervision and administration of special equipment at or above the county level implement safety supervision of special equipment within their respective administrative regions (hereinafter referred to as the special equipment safety supervision and administration department)

Article 5 the production and use units of special equipment shall establish and improve the safety management system of special equipment and post safety system

the main person in charge of the production and use unit of special equipment shall be fully responsible for the safety of the special equipment of the unit

the production and use units of special equipment and the inspection and testing institutions of special equipment shall accept the safety supervision of special equipment conducted by the special equipment safety supervision and management department according to law

Article 6 special equipment inspection and testing institutions shall carry out inspection and testing in accordance with the provisions of these regulations, and bear legal responsibility for their inspection and testing results and appraisal conclusions

Article 7 the local people's governments at or above the county level should urge and support the safety supervision and management departments of special equipment to perform their safety supervision duties according to law, and coordinate and solve the major problems existing in the safety supervision of special equipment before and after the closure of Xichang new steel, Chengdu Steel vanadium and other subordinate subsidiaries by Panzhihua Iron and Steel Group in 2016

Article 8 the State encourages the implementation of scientific management methods, the adoption of advanced technology, the improvement of the safety performance and management level of special equipment, the enhancement of the ability of special equipment production and use units to prevent accidents, and the award of units and individuals that have made remarkable achievements

Article 9 Any unit or individual has the right to report any act in violation of the provisions of these regulations to the safety supervision and Administration Department of special quality assurance equipment and administrative supervision and other relevant departments

the special equipment safety supervision and management department shall establish a special equipment safety supervision and reporting system, publish the report, mailbox or e-mail address, accept the report of illegal acts in the production, use, inspection and detection of special equipment, and deal with it in a timely manner

special equipment safety supervision and management departments, administrative supervision and other relevant departments should keep secret for those who report, which helps to reduce the total depth of the bridge superstructure, and give rewards in accordance with the relevant provisions of the state

Chapter II production of special equipment Article 10 production units of special equipment shall carry out production activities in accordance with the provisions of these regulations and the requirements of the safety technical specifications (hereinafter referred to as the safety technical specifications) formulated and published by the special equipment safety supervision and Administration Department of the State Council

the production unit of special equipment is responsible for the safety performance of its special equipment

Article 11 the design unit of pressure vessels shall obtain the permission of the special equipment safety supervision and Administration Department of the State Council before engaging in the design of pressure vessels

the design unit of pressure vessels shall meet the following conditions:

(I) have designers and design reviewers who are suitable for the design of pressure vessels

(II) have a sound management system and system suitable for the design of pressure vessels

Article 12 the design documents of gas cylinders in boilers and pressure vessels (hereinafter referred to as gas cylinders), oxygen chambers, passenger ropeways and large amusement facilities shall be identified by the inspection and testing institutions approved by the special equipment safety supervision and Administration Department of the State Council before they can be used for manufacturing

Article 13 according to the requirements of the safety technical specifications, the type test of the whole machine or components must be carried out for the special equipment products and components that should be type tested or the trial production of new products and components of special equipment

Article 14 the manufacturing, installation and transformation units of boilers, pressure vessels, elevators, hoisting machinery, passenger ropeways, large amusement facilities and their safety accessories, safety protection devices, as well as the manufacturing units of pipes, pipe fittings, valves, flanges, compensators, safety protection devices for pressure pipelines (hereinafter referred to as pressure pipeline components) shall be licensed by the special equipment safety supervision and Administration Department of the State Council, Can engage in corresponding activities

the manufacturing, installation and transformation unit of the special equipment mentioned in the preceding paragraph shall meet the following conditions:

(1) have professional technicians and skilled workers suitable for the manufacturing, installation and transformation of special equipment

(II) there are production conditions and detection means suitable for the installation and transformation of special equipment after manufacturing, installation and unloading

(III) have a sound quality management system and system

Article 15 when leaving the factory, special equipment shall be attached with design documents, product quality certificates, installation, use and maintenance instructions, supervision and inspection certificates and other documents required by safety technical specifications

Article 16 the maintenance units of boilers, pressure vessels, elevators, hoisting machinery, passenger ropeways and large amusement facilities shall have professional technicians and skilled workers suitable for the maintenance of special equipment and necessary testing means, and shall not engage in corresponding maintenance activities until they are approved by the safety supervision and administration departments of special equipment of provinces, autonomous regions and municipalities directly under the central government

Article 17 boiler, pressure capacity

Copyright © 2011 JIN SHI